BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Manufacturers' Association of Central PA - ECPv6.16.4.1//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-ORIGINAL-URL:https://macentralpa.org X-WR-CALDESC:Events for Manufacturers' Association of Central PA REFRESH-INTERVAL;VALUE=DURATION:PT1H X-Robots-Tag:noindex X-PUBLISHED-TTL:PT1H BEGIN:VTIMEZONE TZID:America/New_York BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20250309T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20251102T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20260308T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20261101T060000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:EDT DTSTART:20270314T070000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:EST DTSTART:20271107T060000 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=America/New_York:20260625T080000 DTEND;TZID=America/New_York:20260625T213000 DTSTAMP:20260623T222544Z CREATED:20260122T171317Z LAST-MODIFIED:20260623T222544Z UID:10000006-1782374400-1782423000@macentralpa.org SUMMARY:Wake Up to Manufacturing 2026 DESCRIPTION:Wake Up to Manufacturing 2026\n\n\n\nTalk Manufacturing with Industry Professionals \n\n\n\n\n \n \n \n\n\nEvent Details\n\n\n\n\n\n\n\nStart your morning with fresh insights\, great food\, and real solutions. \n\n\n\nJoin fellow manufacturing thought-leaders for our monthly breakfast event featuring three industry speakers tackling today’s most pressing challenges\, followed by a live Q&A roundtable discussion.June topic:Supply Chain Resilience- Strategies to strengthen your supply chain and reduce risk.Speakers:Chris Caba (York County Planning Commission)\, Neil Harrold (BAE Systems)\, Zac Hubbard (Ollie Bargain Outlet) \n\n\n\nOur schedule is:  \n\n\n\n\nDoors open at 7:45 AM\n\n\n\nNetworking begins at 8:00 AM\n\n\n\nEvent Starts at 8:15 AM\n\n\n\n\nFull breakfast will be served. \n\n\n\n\nAttending This Event?\n\n\n \n \n \n \n\nMember\n\n\n\n$0\n\n\n \n\n \n \n\nNon-Member\n\n\n\n$15\n\n\n \n\n \n\n\n\nRegister Today\n\n\n\n\nWant to Sponsor These Events?\n\n\n\nSponsoring a session provides a unique opportunity to showcase your commitment to the manufacturing community. Learn a little more about these event opportunities and sponsorship details below.   \n\n\n\n\nSponsorship Details\n\n\n\n \n \n\n\n\n\n \n \n \n\nRegister For This Event\n\n\n\n \n \n\n\n \n \n \n \n Name*\n \n \n First Name\n \n \n \n \n Last Name\n \n \n \n Company Name*Phone*Email*\n \n Membership Status*\n \n \n Yes\n \n \n \n No\n \n \n \n Unsure\n Please tell us if your organization is a member of the Manufacturers’ Association. If you are not a member\, the cost is $15 and you will be invoiced after the event if attended. \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n\n \n\n\n\n \n \n\n\n\n\n \n \n \n\n2026 Wake Up Schedule\n\n\n\nWake Up Schedule: \n\n\n\n\nJanuary (1/15/2026) – MA Membership: Who We Are.Get to know the organization\, our team\, and how we help members thrive.COMPLETED\n\n\n\nFebruary (2/12/2026) – Hiring Processes That Work!Explore proven methods for finding and retaining successful candidates.          Speakers: Vicki Krotzer (Manufacturers’ Association)\, Greg Rymer (Mauser Packaging)\, MaryRose Ritter (The Conrad Company)COMPLETED\n\n\n\nMarch (3/12/2026) – Quality Control in a Digital AgeTools and methods to maintain high standards with modern tech.          Speakers: Matthew Hitchcock (High Concrete Group)\, Tim Auman (I. Auman Machine)\, & Jeff Shellenberger (York Precision Machining & Hydraulics)COMPLETEDSPONSORED BY: LEDGE\, INC\n\n\n\nApril (4/9/2026) – Apprenticeships in ActionHow offering apprenticeships can transform your workforce strategy.          Speakers: Kyle Kluttz (ENGEL North America)\, Demietra Middleton (Harley-Davidson Motor Company)\, David Tomic (Eden Manufacturing Inc.)COMPLETED\n\n\n\nMay (5/14/2026) – CRM Implementation Made SimpleWhat a CRM can do to streamline processes and the options available.          Speakers: Greg Dubin (Daisy Data Displays)\, Matt Hoke (JLS Automation)\, and Taylor Saunders (TAIT)COMPLETED\n\n\n\nJune (6/25/2026) – Supply Chain Resilience:Strategies to strengthen your supply chain and reduce risk. Speakers: Chris Caba (York County Planning Commission)\, Neil Harrold (BAE Systems)\, Zac Hubbard (Ollie Bargain Outlet)\n\n\n\nJuly – No Wake Up  |  Summer Break\n\n\n\nAugust (8/13/2026) – Building Your Digital ImageMarketing tactics that drive revenue and boost brand awareness.SPONSORED BY: PA MEDIA\n\n\n\nSeptember (9/10/2026) – Cybersecurity EssentialsSteps to keep your business information secure in a digital world.SPONSORED BY: GALLAGHER INSURANCE COMPANY\n\n\n\nOctober (10/8/2026) – AI in ManufacturingCurrent trends and practical applications for process improvement.SPONSORED BY: TRIMECH SOLUTIONS\n\n\n\nNovember (11/12/2026) – Data-Driven Decision MakingHow to leverage analytics for smarter business strategies.SPONSORED BY: PA MEDIA\n\n\n\nDecember (12/10/2026) – Company Culture That Stands OutKey cultural improvements that make all the difference.\n\n\n\n\nThe speakers will be released the month prior to the event. \n\n\n \n \n\n\n\n\n \n \n \n\nContact Us\n\n\n\nIf you have any questions or want to be a part of our workforce development discussions\, our team is here to make you a part of the talk.  \n\n\n\n\nBecome a Speaker URL:https://macentralpa.org/event/wake-up-august-2026/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Event ATTACH;FMTTYPE=application/pdf:https://macentralpa.org/wp-content/uploads/2026/01/Wake-Up-MA-Advertising-Opportunities-1.pdf END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260708T080000 DTEND;TZID=America/New_York:20260708T120000 DTSTAMP:20260617T015056Z CREATED:20260522T171752Z LAST-MODIFIED:20260617T015056Z UID:10000293-1783497600-1783512000@macentralpa.org SUMMARY:Shop Math 2 DESCRIPTION:Course Description\n This course presents a review of Algebra\, and teaches the Fundamentals of Plane Geometry\, Geometric Figures\, and Right-Angle Trigonometry. \n \n\n \n\n Objectives & Outline\n Upon completion of the course the student will have an analytical approach to problem solving in understanding the fundamentals of Right-Angle Trigonometry\, and the Principles of Plane Geometry. \nCourse Outline:\nA. Plane Geometry – Geometric Figures \n\nGeometric Principles for Lines\, Angles\, and Polygons\nGeometric Principles for Circles\, and Lines & Angles of Circles\nPythagorean Theorem\nB. Trigonometry \n\nFunctions and Inverse Functions of Trigonometry\nSolving Right Triangles\nTrigonometry for Practical Machine Applications\nRight angle solutions\n \n \n\n\n\n\nDetails\n\n\n\nDate: July 8 – August 7\, 2026 ( no class 7/20\, 7/22\, 7/24) \n\n\n\nDays: M\, W\, F \n\n\n\nTimes: 8 am – 12 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $ 695 \n\n\n\nNON Member: $ 1040 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/math-2/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260713T090000 DTEND;TZID=America/New_York:20260713T153000 DTSTAMP:20260622T110516Z CREATED:20260616T171700Z LAST-MODIFIED:20260622T110516Z UID:10000323-1783933200-1783956600@macentralpa.org SUMMARY:Skilled Basic Welder - Harrisburg DESCRIPTION:Course Description\n\n\n\nThis program supports the U.S. Maritime and Defense Industrial Base manufacturing through The Manufacturers’ Association’s Talent & Innovation Defense Ecosystem (TIDE) Project\, helping build highly capable and innovation-driven talent for our regional defense manufacturers. Whether you are a defense employer looking to skill up your existing workforce\, or an individual interested in working in defense manufacturing\, this course will deliver hands-on\, skill-focused training to help meet the critical demands of modern defense manufacturing in our region \n\n\n\nParticipants in this entry-level welding basics course will learn: \n\n\n\nBasics in SMAW\, Mig\, Tig\, and Flux Core weldingBlueprint readingWelding safety protocolsProper equipment setup and usage \n\n\n\n \n \n\n\n\n\n \n \n \n\nDetails\n\n\n\n\nEligibility:  Referrals from employers\, Referrals from partner organizations\, Qualified individuals\n\n\n\nCourse: Welding\n\n\n\nDates: July 13 – August 13\, 2026 (5 weeks)\n\n\n\nDays: Monday – Thursday\n\n\n\nTime: 9:00 am – 3:30 pm\n\n\n\nLocation: Dauphin County Technical School (6001 Locust Lane\, Harrisburg PA 17109)\n\n\n\nCost: No Cost to qualified individuals or employers (TIDE Grant)\n\n\n\nQuestions: Quentin Moore (qmoore@mascpa.org) or Vicki Krotzer (vkrotzer@mascpa.org)\n\n\n\n \n \n\n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \n\n \n \n \n \n Name*\n \n \n First Name\n \n \n \n \n Last Name\n \n \n \n Email*\n \n Cell Phone*Please address the following questions:*\n \n I am a U.S. Citizen.\n \n \n I am physically able to perform the tasks of this occupation.\n \n \n I am able to pass a criminal background check upon completion of this training.\n Company Name (If Sponsored)Company Address (If Sponsored) \n \n \n \n Street Address\n \n \n Address Line 2\n \n \n City\n \n \n State / Province / Region\n \n \n ZIP / Postal Code\n \n AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire\, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCabo VerdeCambodiaCameroonCanadaCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongoCongo\, Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzechiaCôte d'IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatiniEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea\, Democratic People's Republic ofKorea\, Republic ofKuwaitKyrgyzstanLao People's Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth MacedoniaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine\, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussian FederationRwandaRéunionSaint BarthélemySaint Helena\, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan MayenSwedenSwitzerlandSyria Arab RepublicTaiwanTajikistanTanzania\, the United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluTürkiyeUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaViet NamVirgin Islands\, BritishVirgin Islands\, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands\n Country\n \n \n Company Contact (If Sponsored): First Name\, Last Name\, Email Address\, & Phone Number URL:https://macentralpa.org/event/welder-harrisburg/ LOCATION:Dauphin County Technical School\, 6001 Locust Lane\, Harrisburg\, Pennsylvania\, 17109\, United States CATEGORIES:Course,Professional Development END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260715T090000 DTEND;TZID=America/New_York:20260715T130000 DTSTAMP:20260617T002642Z CREATED:20260602T211223Z LAST-MODIFIED:20260617T002642Z UID:10000302-1784106000-1784120400@macentralpa.org SUMMARY:CPR\, First Aid & AED DESCRIPTION:Course Description\n The First Aid/CPR/AED course teaches students how to recognize and care for a variety of first aid and cardiac emergencies.\nHaving the ability to recognize a serious medical emergency and obtaining the knowledge on how to help could make the difference in a life or death situation. \n \n\n \n\n Objectives & Outline\n \nHaving the ability to recognize a serious medical emergency and obtaining the knowledge on how to help could make the difference in a life or death situation.\nProgram complies with the latest guidelines as outlined by the American Heart Association.\nHands on practice with the instructor.\nStudents will receive a certificate for Adult First Aid/CPR/AED that is valid for two years.\n\n \n \n\n\n\n\nDetails\n\n\n\nDate:  July 15\, 2026 \n\n\n\nTimes:  9 am – 1 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $ 95 \n\n\n\n(NonMember) $130 \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/cpr-first-aid-aed/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Health & Safety END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260720T080000 DTEND;TZID=America/New_York:20260720T160000 DTSTAMP:20260610T214907Z CREATED:20260522T174010Z LAST-MODIFIED:20260610T214907Z UID:10000295-1784534400-1784563200@macentralpa.org SUMMARY:Industrial Motor Controls DESCRIPTION:Course Description\n This course will introduce the students to industrial motor control technology and troubleshooting techniques. Each student will wire several industrial motor control circuits employing motor starters\, relays\, timers\, etc. \n \n\n \n\n Objectives & Outline\n This class will prepare the student to recognize the various elements of motor controls and the techniques used to maintain them in an industrial environment. The student will develop a sound understanding of relay control circuits and motor starters. \nCourse Outline:\n• Rebuilding a relay\n• Design and draw an industrial control circuit\n• Wire a control panel\n• Reversing starters by designing several control circuits\n• Basic kinematics and programming \nPre-Requisite: Student should have working knowledge or have taken the Electrical 1 class \n \n \n\n\n\n\nDetails\n\n\n\nDate: July 20 – 23 \, 2026 \n\n\n\nTimes: 8 am – 4 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $1050 ( includes book) \n\n\n\nNON Member: $ 1540 (includes book) \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/industrial-motor-controls/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260720T140000 DTEND;TZID=America/New_York:20260720T180000 DTSTAMP:20260622T134410Z CREATED:20260622T110444Z LAST-MODIFIED:20260622T134410Z UID:10000348-1784556000-1784570400@macentralpa.org SUMMARY:Skilled Basic Welder - York DESCRIPTION:Course Description\n\n\n\nThis program supports the U.S. Maritime and Defense Industrial Base manufacturing through The Manufacturers’ Association’s Talent & Innovation Defense Ecosystem (TIDE) Project\, helping build highly capable and innovation-driven talent for our regional defense manufacturers. Whether you are a defense employer looking to skill up your existing workforce\, or an individual interested in working in defense manufacturing\, this course will deliver hands-on\, skill-focused training to help meet the critical demands of modern defense manufacturing in our region \n\n\n\nParticipants in this entry-level welding basics course will learn: \n\n\n\nBasics in SMAW\, Mig\, Tig\, and Flux Core weldingBlueprint readingWelding safety protocolsProper equipment setup and usage \n\n\n\n \n \n\n\n\n\n \n \n \n\nDetails\n\n\n\n\nEligibility: Referrals from employers\, Referrals from partner organizations\, Qualified individuals\n\n\n\nCourse: Welding\n\n\n\nDates: July 20 – September 9\, 2026 (8 weeks)\n\n\n\nDays: Monday – Thursday\n\n\n\nTime: 2:00 pm – 6:00 pm\n\n\n\nLocation: Harrisburg Area Community College (HACC) – York Campus (2101 Pennsylvania Ave\, York PA 17404)\n\n\n\nCost: No Cost to qualified individuals or employers (TIDE Grant)\n\n\n\nQuestions: Quentin Moore (qmoore@mascpa.org) or Vicki Krotzer (vkrotzer@mascpa.org)\n\n\n\n \n \n\n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \n\n \n \n \n \n Name*\n \n \n First Name\n \n \n \n \n Last Name\n \n \n \n Email*\n \n Cell Phone*Please address the following questions:*\n \n I am a U.S. Citizen.\n \n \n I am physically able to perform the tasks of this occupation.\n \n \n I am able to pass a criminal background check upon completion of this training.\n Company Name (If Sponsored)Company Address (If Sponsored) \n \n \n \n Street Address\n \n \n Address Line 2\n \n \n City\n \n \n State / Province / Region\n \n \n ZIP / Postal Code\n \n AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire\, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCabo VerdeCambodiaCameroonCanadaCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongoCongo\, Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzechiaCôte d'IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatiniEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea\, Democratic People's Republic ofKorea\, Republic ofKuwaitKyrgyzstanLao People's Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth MacedoniaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine\, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussian FederationRwandaRéunionSaint BarthélemySaint Helena\, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan MayenSwedenSwitzerlandSyria Arab RepublicTaiwanTajikistanTanzania\, the United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluTürkiyeUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaViet NamVirgin Islands\, BritishVirgin Islands\, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands\n Country\n \n \n Company Contact (If Sponsored): First Name\, Last Name\, Email Address\, & Phone Number URL:https://macentralpa.org/event/skilled-basic-welder-york/ LOCATION:Harrisburg Area Community College (HACC) – York Campus\, 2101 Pennsylvania Ave\, York\, Pennsylvania\, 17404\, United States CATEGORIES:Course,Professional Development END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260727T083000 DTEND;TZID=America/New_York:20260727T160000 DTSTAMP:20260610T213110Z CREATED:20260603T163804Z LAST-MODIFIED:20260610T213110Z UID:10000303-1785141000-1785168000@macentralpa.org SUMMARY:Intro. to Industrial Electricity DESCRIPTION:Course Description\n This course provides a comprehensive introduction to the principles and practices of electricity and electronics in commercial\, and industrial settings. It covers a wide range of topics including NFPA 70E® arc blast and arc flash requirements\, Ohm’s Law\, power optimization\, utility power factor and peak demand penalty\, load shedding\, power factor correction. \nThe course also emphasizes on the importance of safety\, math principles and applications\, and the understanding of symbols and print reading. \n \n\n \n\n Objectives & Outline\n The primary objective of this course is to equip students with a solid understanding of electrical and electronic principles and their applications in various settings. Students will learn about different types of circuits\, transformers\, electric motors\, and digital electronic circuits. The course aims to enhance students’ skills in taking standard measurements\, understanding meter abbreviations and displays\, and reading and interpreting schematics and prints. \nCourse Outline:\n• Introduction to Electricity Principles\n• Understanding Basic Quantities\n• Application of Ohm’s Law and the Power Formula\n• Importance of Safety in Electrical Practices\n• Application of Math Principles in Electrical Practices\n• Understanding Numbering Systems and Codes\n• Learning Meter Abbreviations and Displays\n• Techniques for Taking Standard Measurements\n• Understanding Symbols and Printreading\n• Study of Circuit Conductors\, Connections\, and Protection \n \n \n\n\n\n\nDetails\n\n\n\nDate:  July 27 – 31\, 2026 \n\n\n\nTimes: 8:30 am – 4 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $850 \n\n\n\nCost ( non member) $1600 \n\n\n\n \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/intro-to-industrial-electricity/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260728T080000 DTEND;TZID=America/New_York:20260728T153000 DTSTAMP:20260610T215119Z CREATED:20260522T173703Z LAST-MODIFIED:20260610T215119Z UID:10000294-1785225600-1785252600@macentralpa.org SUMMARY:PLC Maintenance & Troubleshooting DESCRIPTION:Course Description\n The course is designed to introduce students to troubleshooting and PLC maintenance. Some topics covered will be Input/ Output: Devices\, sensor types\, solenoids etc.\, Numbering Systems\, I/O Processing\, how a PLC operates\, Ladder Programming and how to read and understand a plc program. \n \n\n \n\n Objectives & Outline\n This course will give the student a good beginning knowledge of troubleshooting and maintaining PLC’s \nCourse Outline: \n\nTroubleshoot input devices\nTroubleshoot an output device\nTroubleshoot a plc input\nTroubleshoot a plc output\nTroubleshoot a plc program input\nTroubleshoot a plc program output\nSome Ladder Logic programming\nOmron and Siemens PLCs.\n \n \n\n\n\n\nDetails\n\n\n\nDate:  ( Tuesday 7/28\, Thursday 7/30 & Tuesday 8/4) \n\n\n\nTimes: 8 am -3 :30 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $875 \n\n\n\nNON Member: $1\,600 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/plc-maintenance-troubleshooting-2/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260804T170000 DTEND;TZID=America/New_York:20260804T210000 DTSTAMP:20260622T134234Z CREATED:20260622T131850Z LAST-MODIFIED:20260622T134234Z UID:10000347-1785862800-1785877200@macentralpa.org SUMMARY:Skilled Basic Welder - Lancaster DESCRIPTION:Course Description\n\n\n\nThis program supports the U.S. Maritime and Defense Industrial Base manufacturing through The Manufacturers’ Association’s Talent & Innovation Defense Ecosystem (TIDE) Project\, helping build highly capable and innovation-driven talent for our regional defense manufacturers. Whether you are a defense employer looking to skill up your existing workforce\, or an individual interested in working in defense manufacturing\, this course will deliver hands-on\, skill-focused training to help meet the critical demands of modern defense manufacturing in our region \n\n\n\nParticipants in this entry-level welding basics course will learn: \n\n\n\nBasics in SMAW\, Mig\, Tig\, and Flux Core weldingBlueprint readingWelding safety protocolsProper equipment setup and usage \n\n\n\n \n \n\n\n\n\n \n \n \n\nDetails\n\n\n\n\nEligibility: Referrals from employers\, Referrals from partner organizations\, Qualified individuals\n\n\n\nCourse: Welding\n\n\n\nDates: August 4 – October 8\, 2026 (10 weeks)\n\n\n\nDays: Tuesday/Wednesday/Thursday\n\n\n\nTime: 5:00 pm – 9:00 pm\n\n\n\nLocation: Lancaster County Career & Technology Center – Mount Joy Campus (432 Old Market Street\, Mount Joy PA 17552)\n\n\n\nCost: No Cost to qualified individuals or employers (TIDE Grant)\n\n\n\nQuestions: Quentin Moore (qmoore@mascpa.org) or Vicki Krotzer (vkrotzer@mascpa.org)\n\n\n\n \n \n\n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \n\n \n \n \n \n Name*\n \n \n First Name\n \n \n \n \n Last Name\n \n \n \n Email*\n \n Cell Phone*Please address the following questions:*\n \n I am a U.S. Citizen.\n \n \n I am physically able to perform the tasks of this occupation.\n \n \n I am able to pass a criminal background check upon completion of this training.\n Company Name (If Sponsored)Company Address (If Sponsored) \n \n \n \n Street Address\n \n \n Address Line 2\n \n \n City\n \n \n State / Province / Region\n \n \n ZIP / Postal Code\n \n AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBonaire\, Sint Eustatius and SabaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBrunei DarussalamBulgariaBurkina FasoBurundiCabo VerdeCambodiaCameroonCanadaCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos IslandsColombiaComorosCongoCongo\, Democratic Republic of theCook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzechiaCôte d'IvoireDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEswatiniEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHoly SeeHondurasHong KongHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea\, Democratic People's Republic ofKorea\, Republic ofKuwaitKyrgyzstanLao People's Democratic RepublicLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacaoMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorth MacedoniaNorthern Mariana IslandsNorwayOmanPakistanPalauPalestine\, State ofPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarRomaniaRussian FederationRwandaRéunionSaint BarthélemySaint Helena\, Ascension and Tristan da CunhaSaint Kitts and NevisSaint LuciaSaint MartinSaint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSint MaartenSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth SudanSpainSri LankaSudanSurinameSvalbard and Jan MayenSwedenSwitzerlandSyria Arab RepublicTaiwanTajikistanTanzania\, the United Republic ofThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkmenistanTurks and Caicos IslandsTuvaluTürkiyeUS Minor Outlying IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVenezuelaViet NamVirgin Islands\, BritishVirgin Islands\, U.S.Wallis and FutunaWestern SaharaYemenZambiaZimbabweÅland Islands\n Country\n \n \n Company Contact (If Sponsored): First Name\, Last Name\, Email Address\, & Phone Number URL:https://macentralpa.org/event/skilled-basic-welder-lancaster/ LOCATION:Lancaster County Career & Technology Center\, 432 Old Market Street\, Mount Joy\, Pennsylvania\, 17552\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260811T080000 DTEND;TZID=America/New_York:20260811T163000 DTSTAMP:20260616T223810Z CREATED:20260522T174831Z LAST-MODIFIED:20260616T223810Z UID:10000296-1786435200-1786465800@macentralpa.org SUMMARY:JStandard DESCRIPTION:Course Description\n This 4 day course is a modularized IPC-certified training program that allows specialization at the application level. It provides hands-on application of the standard for industry technology segments such as Through Hole and Surface Mount Technology (SMT). \n \n\n \n\n Objectives & Outline\n Earn a 2 Year Certification upon completion of this course.\nCourse Modules: \n\nGeneral Requirements\nWires and Terminals\nThrough Hole Technology\nSurface Mount Technology\nInspection\n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 11 – 14\, 2026 \n\n\n\nTimes: 8:30 am – 4:30 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:    \n\n\n\nNON Member:  \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/jstandard/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260813T080000 DTEND;TZID=America/New_York:20260813T130000 DTSTAMP:20260616T223155Z CREATED:20260606T213929Z LAST-MODIFIED:20260616T223155Z UID:10000313-1786608000-1786626000@macentralpa.org SUMMARY:OSHA -10 DESCRIPTION:Course Description\n This two day\, ten-hour course provides the participant with training on topics important to understanding OSHA requirements. It’s necessary to understand these requirements for creating\, maintaining\, and improving the occupational safety of employees of manufacturers and other general industry companies. \n \n\n \n\n Objectives & Outline\n This course covers many OSHA regulations and provide insights into compliance requirements\, reporting requirements\, enforcement\, penalties\, general facility safety\, and techniques to use to minimize injuries and illnesses\, to report them to OSHA and to maintain a safe and healthy workplace. \nSafety in the workplace is a must if you want your employees to be productive and for your company to be profitable. Injuries and illnesses caused by unsafe acts and conditions are likely to happen when training\, written programs\, and procedures are not planned\, documented\, and implemented. \nOSHA Outreach Training for General Industry program focuses on SAFE management principles that can make your company both compliant with OSHA and a safe place to work. \n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 13 & 14\, 2026 \n\n\n\nTimes:  8 am – 1 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $ 430 \n\n\n\n(NonMember) $645 \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/osha-10/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Health & Safety END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260817T180000 DTEND;TZID=America/New_York:20260817T210000 DTSTAMP:20260616T223102Z CREATED:20260606T214925Z LAST-MODIFIED:20260616T223102Z UID:10000314-1786989600-1787000400@macentralpa.org SUMMARY:Die Theory DESCRIPTION:Course Description\n This course is designed to teach the principles of blanking and/or piercing dies\, bending\, screwing\, dowel holes\, die life\, punches\, pilots\, die-block construction\, strippers and stock guides\, shredders and knockouts\, nest gauges\, pushers\, die stops\, stock materials utilization and strip layout principles. \n \n\n \n\n Objectives & Outline\n Students will learn basic techniques and theories of building and stamping dies along with the essential facts of cutting and forming operations. \nCourse Outline: \n\nTypes of dies\nDie construction\nCutting clearance\nMetal forming\nDie maintenance\n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 17 – September 2026 \n\n\n\nDays: M & W \n\n\n\nTimes: 6-9 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $ 550 \n\n\n\nCost (non member) $820 \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/die-theory/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260817T180000 DTEND;TZID=America/New_York:20260817T210000 DTSTAMP:20260616T222933Z CREATED:20260606T220820Z LAST-MODIFIED:20260616T222933Z UID:10000316-1786989600-1787000400@macentralpa.org SUMMARY:Intro. to Robotics FANUC DESCRIPTION:Course Description\n This course is designed to equip operators\, technicians\, engineers\, and programmers with the skills necessary to set up\, record\, and troubleshoot programs on a FANUC Robot using HandlingTool Software. The curriculum includes lectures\, chapter reviews\, demonstrations\, and a series of lab exercises to reinforce learning. Safety procedures are integrated into all training exercises to ensure a safe and effective learning environment. \n \n\n \n\n Objectives & Outline\n Upon successful completion of this course\, students will be able to power up and jog the robot\, teach frames\, and recover from common program and robot faults. They will also be able to execute production operations\, create\, modify\, and execute a material handling program\, and create and execute MACROs. Additionally\, students will learn to monitor\, force\, and simulate input and output signals\, and backup and restore individual programs and files.\nCourse Outline:\n1. Introduction to FANUC Robot and HandlingTool Software\n2. Powering up and jogging the robot\n3. Teaching frames and recovering from faults\n4. Executing production operations\n5. Creating\, modifying\, and executing a material handling program\n6. Creating and executing MACROs\n7. Monitoring\, forcing\, and simulating input and output signals\n8. Backing up and restoring individual programs and files\n9. Safety procedures   \n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 17 – September 30\, 2026 ( no class 9/7/26) \n\n\n\nDays: M & W \n\n\n\nTimes: 6-9 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $ 1025 \n\n\n\nCost (non member) $1350 \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/intro-to-robotics-fanuc/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260818T180000 DTEND;TZID=America/New_York:20260818T210000 DTSTAMP:20260616T222816Z CREATED:20260520T142245Z LAST-MODIFIED:20260616T222816Z UID:10000292-1787076000-1787086800@macentralpa.org SUMMARY:Blueprint Reading and Measuring Devices DESCRIPTION:Course Description\n Blueprint Reading and Measuring Devices is designed for companies that manufacture metal parts such as machine shops or sheet metal and stamping companies etc. \nThis course provides the student with a basic understanding of blueprint reading. It presents background information on prints\, how multi-view drawings are created\, the principles of projection and instruction in developing the skill of visualization. It explains the interpretation of the dimensional requirements shown on the print\, the interpretation of detailed drawings that include single part\, tabulated detail\, stamped product\, and tabulated stamped product drawings. It deals with sectional views of drawings to include full\, offset\, aligned\, removed sections\, and includes auxiliary views and assembly drawings. An understanding of Screw Thread Specification will also be covered. \n \n\n \n\n Objectives & Outline\n This class will prepare the student to be able to read\, understand and interpret engineering drawings and be prepared for the GD&T class. The student will also gain an understanding of the most common machine shop measuring instruments\, and how to use them accurately. \nThe student will also gain proficiency in using the most common machine shop measuring instruments including Steel Rule\, Outside/Inside Micrometers\, Dial/Vernier Calipers\, Telescoping and Small Hole gages\, as well as Protractors for angular measurement. \n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 18 – September 3\, 2026 \n\n\n\nTimes:  6 – 9 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $435 \n\n\n\nNON Member:  $650 \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/blueprint-reading-and-measuring-devices/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260818T180000 DTEND;TZID=America/New_York:20260818T210000 DTSTAMP:20260606T220252Z CREATED:20260606T220146Z LAST-MODIFIED:20260606T220252Z UID:10000315-1787076000-1787086800@macentralpa.org SUMMARY:Shop Math 1 DESCRIPTION:Course Description\n This course offers a review and understanding of Common Fractions\, Decimal Fractions\, Percentages\, Linear Measurement (English / metric)\, and the Fundamentals of Algebra. Also included is the study and manipulation of common shop formulas including Speeds & Feeds\, Cutting Time\, and Gear Ratios & Dimensions. \n \n\n \n\n Objectives & Outline\n Upon completion of the course the student will understand algebraic functions and be prepared for next level of math courses\, Geometry and Trigonometry. \nCourse Outline: \n\nAddition\, subtraction\nFractions\nEnglish and Metric\nFundamentals of Algebra\nShop Formulas\n \n \n\n\n\n\nDetails\n\n\n\nDate: August 17 – October 19\, 2026 \n\n\n\nDays: M & wTimes:  6-9 pmLocation: MA Training Center 3405 Board RoadCost (member): $695 +bookCost (non-member): $1040 +book \n\n\n\nThis class can be used towards Apprentice Credits \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/shop-math-1-2/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260818T180000 DTEND;TZID=America/New_York:20260818T210000 DTSTAMP:20260606T221147Z CREATED:20260606T221146Z LAST-MODIFIED:20260606T221147Z UID:10000317-1787076000-1787086800@macentralpa.org SUMMARY:CNC 1 DESCRIPTION:Course Description\n This course is designed to give an introductory working knowledge of basic CNC programming. \n \n\n \n\n Objectives & Outline\n Student will learn basic programming concepts and techniques which will include; a study of EIA word address programming Language and formats\, numerical control systems for various machine tools\, process planning\, math for numerical control and an entry level coverage of the latest CNC CAD-CAM programs: Mastercam and Esprit CAM \nPrerequisite: Students must have the mathematics skills outlined in Shop Math 1 & 2 \nCourse Outline: \n• Numerical control systems and components.\n• Use of various types of CNC machines and tooling.\n• CNC machining strategies and operations from working drawings.\n• Manually write two and three axis programs in EIA word address format\, for various CNC machine tools.\n• Electronically create CNC part programs in the latest CAD-CAM Programing software: Mastercam and Esprit CAM\n*Course will start off with computer basics training \nStudents will need to have access to a computer to complete assignments outside of class hours \n \n \n\n\n\n\nDetails\n\n\n\nDate: August 18 – October 29\, 2026 \n\n\n\nDays: T & THTimes:  6-9 pmLocation: MA Training Center 3405 Board RoadCost (member): $975Cost (non-member): $1450 \n\n\n\nThis class can be used towards Apprentice Credits \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/cnc-1/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260824T083000 DTEND;TZID=America/New_York:20260824T123000 DTSTAMP:20260602T200506Z CREATED:20260602T200056Z LAST-MODIFIED:20260602T200506Z UID:10000300-1787560200-1787574600@macentralpa.org SUMMARY:Arc Flash NFPA 70e DESCRIPTION:Course Description\n This 4-hour Arc Flash NFPA 70e Training is designed to provide employees with a comprehensive understanding of electrical safety\, focusing on the hazards and risks associated with arc flash incidents. \nThis training covers the key principles of the NFPA 70E standard\, including proper risk assessment\, the importance of personal protective equipment (PPE)\, and safe work practices for working with or near energized electrical systems. \nThe training also includes guidance on interpreting arc flash hazard labels\, calculating incident energy\, and selecting the appropriate PPE based on specific tasks. By the end of the session\, attendees will have the knowledge and skills needed to identify electrical hazards\, assess risks\, and safely work in compliance with NFPA 70E regulations to prevent accidents and ensure workplace safety. This training meets NFPA 70e training guidelines. \n \n\n \n\n Objectives & Outline\n \nCauses of Electric Arcs\nThe Nature of Electrical Arcs\nHazards of Arcing Faults\nProbability of Survival\nImpacts of Arc Flash\nPotential Exposure to Arc Flash\nPrecautions to take when working with Live Energy\nArc Flash PPE\nFlash Protection Boundary\nArc Flash Labeling of Electrical Cabinets\, Breakers & MCC Buckets\nDevelopments in Addressing Arc Flash Hazard.\nCritical Electrical Safety Requirements of CFR 29 1910.333 and NFPA 70E\nDevelopments – 2018 NFPA 70E\nHow to properly throw an Electrical Disconnect\nElectrically Safe Work Conditions & Work Practices\n\n \n \n\n\n\n\nDetails\n\n\n\nDate:  August 24\, 2026 \n\n\n\nTimes: 8:30 am – 12:30 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) $150 \n\n\n\nCost (non member) $200 \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/nfpa-70e/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Health & Safety ATTACH;FMTTYPE=image/jpeg:https://macentralpa.org/wp-content/uploads/2026/06/arch-flash-300x283-1.jpg END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260831T180000 DTEND;TZID=America/New_York:20260831T210000 DTSTAMP:20260616T222610Z CREATED:20260520T142119Z LAST-MODIFIED:20260616T222610Z UID:10000291-1788199200-1788210000@macentralpa.org SUMMARY:PLC Maintenance & Troubleshooting DESCRIPTION:Course Description\n The course is designed to introduce students to troubleshooting and PLC maintenance. Some topics covered will be Input/ Output: Devices\, sensor types\, solenoids etc.\, Numbering Systems\, I/O Processing\, how a PLC operates\, Ladder Programming and how to read and understand a plc program. \n \n\n \n\n Objectives & Outline\n This course will give the student a good beginning knowledge of troubleshooting and maintaining PLC’s \nCourse Outline: \n\nTroubleshoot input devices\nTroubleshoot an output device\nTroubleshoot a plc input\nTroubleshoot a plc output\nTroubleshoot a plc program input\nTroubleshoot a plc program output\nSome Ladder Logic programming\nOmron and Siemens PLCs.\n \n \n\n\n\n\nDetails\n\n\n\nThis class is gear towards apprentices. \n\n\n\nDate: August 31 – October 14\, 2026 ( no class 9/7/26) \n\n\n\nDays : M & W \n\n\n\nTimes: 6 – 9 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $550 \n\n\n\nNON Member: $550 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/plc-maintenance-troubleshooting/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260908T180000 DTEND;TZID=America/New_York:20260908T210000 DTSTAMP:20260616T221042Z CREATED:20260610T175025Z LAST-MODIFIED:20260616T221042Z UID:10000318-1788890400-1788901200@macentralpa.org SUMMARY:Welding 1 Intro. DESCRIPTION:Course Description\n This course is designed to give apprentices a basic understanding and introduction to MIG\, TIG and Stick Welding. Classroom instruction will include process descriptions/applications as they apply to sheet metal fabrication and equipment set-up. \n \n\n \n\n Objectives & Outline\n Students will gain a better understanding of welding knowledge and enjoy practical instruction for sheet metal welding that includes Gas Metal Arc Welding and Plasma Cutting. Welding and Brazing processes will be demonstrated but not instructed. \nCourse Outline: \n\nIntroduction and Course Overview\nStick Welding/General Information\nGMAW-MIG Welding\nGTAW-TIG Welding\nOXY-Fuel-Brazing\nCutting Processes\nGeneral Review-All Processes\n \n \n\n\n\n\nDetails\n\n\n\nThis apprentice class is full\, please contact us for other dates \n\n\n\nDate: September 8- October 10\,2026 \n\n\n\nDays : T & Th \n\n\n\nTimes: 6 – 9 pm \n\n\n\nLocation: MA Training Partner York Technical High School \n\n\n\nMember Cost:   $1195 \n\n\n\nNON Member: $1795 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/welding-1-intro/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260909T080000 DTEND;TZID=America/New_York:20260909T113000 DTSTAMP:20260602T210102Z CREATED:20260520T141917Z LAST-MODIFIED:20260602T210102Z UID:10000290-1788940800-1788953400@macentralpa.org SUMMARY:Supervisory 2 - Lancaster DESCRIPTION:Course Description\n Advance your supervision knowledge to the next level!   \n\n\n\nIf have been recently promoted\, working on your career goals or a seasoned supervisor\, then this program is for you! \nThis all NEW 14- hour Level II Certificate Program\,  is facilitated by one of Franklin Covey’s highly requested trainers.  \nThis course content reinforces and delves deeper into the PERFORM model. Participants will have the opportunity for peer interaction plus the ability to discuss real-life scenarios with instructors who have extensive training and supervisory experience. \n\n\n\n \n\n \n\n Objectives & Outline\n \nLiving the “mission;”- managing multiple priorities\nDealing with complaints and grievances\n Interviewing job candidates\nOn the job training\, performance appraisals\, resolving conflicts in the workplace\nCounseling “troubled” employees\, correcting problem behavior\, conducting disciplinary actions\nIdentifying legal and diversity Issues\, employee safety and making decisions in the workplace\n\n \n \n\n\n\n\nDetails\n\n\n\nDate:           September 9-30\, 2026 Sessions:   4 consecutive WednesdaysTimes:         8:00 am – 11:30 amLocation:   MA Training Partner Location- Thaddeus Stevens  (room location will be sent with the reminder a week before class)Cost (member): $725Cost (non-member): 1050 \n\n\n\nWant to earn the Master Supervision Certificate?  Complete all 3 levels & two elective courses. \n\n\n\n* This course is also available for onsite company specific.* \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/supervisory-2-lancaster/ CATEGORIES:Course,Professional Development END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260909T080000 DTEND;TZID=America/New_York:20260909T160000 DTSTAMP:20260616T215815Z CREATED:20260604T204829Z LAST-MODIFIED:20260616T215815Z UID:10000304-1788940800-1788969600@macentralpa.org SUMMARY:Industrial Motor Controls DESCRIPTION:Course Description\n This course will introduce the students to industrial motor control technology and troubleshooting techniques. Each student will wire several industrial motor control circuits employing motor starters\, relays\, timers\, etc. \n \n\n \n\n Objectives & Outline\n This class will prepare the student to recognize the various elements of motor controls and the techniques used to maintain them in an industrial environment. The student will develop a sound understanding of relay control circuits and motor starters. \nCourse Outline:\n• Rebuilding a relay\n• Design and draw an industrial control circuit\n• Wire a control panel\n• Reversing starters by designing several control circuits\n• Basic kinematics and programming \nPre-Requisite: Student should have working knowledge or have taken the Electrical 1 class \n \n \n\n\n\n\nDetails\n\n\n\nDate:  September 9 – 14\, 2026 ( Wednesday 9/9\, Thursday 9/10\, Friday 9/11 & Monday 9/14) no weekends \n\n\n\nTimes: 8 am – 4 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $1025 ( +book) \n\n\n\nNON Member: $ 1550 ( +book) \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/industrial-motor-controls-2/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260909T123000 DTEND;TZID=America/New_York:20260909T160000 DTSTAMP:20260602T210324Z CREATED:20260520T140442Z LAST-MODIFIED:20260602T210324Z UID:10000289-1788957000-1788969600@macentralpa.org SUMMARY:Supervisory 1 - Lancaster DESCRIPTION:Course Description\n Receive the tools to take your supervision abilities to the next level. \nBecome a confident leader who is ready to take charge of your department and learn how to treat your employees with dignity and respect. \nThis all NEW 14 hour certificate program is facilitated by one of Franklin Coveys highly requested trainer’s. Receive the tools to take your supervision abilities to the next level. Become a confident leader ready to take charge of your department and learn how to treat your employees with dignity and respect. \n \n\n \n\n Objectives & Outline\n The course will provide potential or current supervisors with the basic tools and skillsets to “get results through other people”. \nParticipants will have the opportunity for peer interaction plus the ability to discuss real-life scenarios with instructors that have extensive training and supervisory experience. \nIf have been recently promoted\, working on your career goals or a seasoned supervisor\, then this program is for you! \nTopics include: \n\nRoles in Management\nCommunicating clear expectations\nDelegating\nBuilding trusting relationships through the DISC model\nProviding feedback\nTraining/Coaching\nProviding recognition\nResolving conflict while maintaining morale\n\n* This course is also available for onsite company specific.* \nWant to earn the Master Supervision Certificate?  Complete all 3 levels & two elective courses. \n \n \n\n\n\n\nDetails\n\n\n\nDate:  September 9 -30\, 2026Sessions: 4 consecutive WednesdaysTimes:  12:30pm -4pmLocation: The Manufacturer’s Association Training Partner location- Thaddeus Stevens (room location will be sent with the reminder a week before class)Cost (member): $725Non Member: $1050 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/supervisory-1-lancaster/ CATEGORIES:Course,Professional Development END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260914T180000 DTEND;TZID=America/New_York:20260914T210000 DTSTAMP:20260616T220627Z CREATED:20260610T205619Z LAST-MODIFIED:20260616T220627Z UID:10000320-1789408800-1789419600@macentralpa.org SUMMARY:Inspection Equipment DESCRIPTION:Course Description\n This course will cover the basic operation of the most common measuring instruments and inspection equipment found in today’s manufacturing quality labs. \n \n\n \n\n Objectives & Outline\n The student will learn the functions and capabilities of each instrument and how to take and record accurate measurement readings. Also covered will be proper care and calibration checks of each instrument.\nIncluded instruments will be: Steel Rule\, All types of Micrometers\, Dial/Vernier Calipers\, Gage Pins/Blocks\, Dial Indicators\, Dial/Vernier Hight gage\, Digital/Dial Drop gage\, Tool Makers Microscope\, Optical Comparator\, etc. \n\nInstrument application / selection\nDirect / Indirect Measurements\nRecording Data\nAccuracy & Error\nGages\nCalibration\nCare and maintenance\n\n \n \n\n\n\n\nDetails\n\n\n\nDate: September 14 – October 14\, 2026 \n\n\n\nTime: 6 – 9 pmTimes:  T & THLocation: MA Training Center 3405 Board RoadCost (member): $620 +bookCost (non-member): $900 +book \n\n\n\nThis class can be used towards Apprentice Credits \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/inspection-equipment/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260915T083000 DTEND;TZID=America/New_York:20260915T160000 DTSTAMP:20260616T220653Z CREATED:20260604T205255Z LAST-MODIFIED:20260616T220653Z UID:10000305-1789461000-1789488000@macentralpa.org SUMMARY:Motor Drives DESCRIPTION:Course Description\n This course will teach students fundamentals of Variable Frequency Drives for AC Motors and Variable Speed Drives for DC Motors. \n \n\n \n\n Objectives & Outline\n The students will learn theory of operation and to size\, install\, and program VFD’s and VSD’s. \nCourse Outline:\n• Proper installation guidelines\n• Starting and Stopping\n• Programming using built-in interface\n• Programming using a PC\n• Control using a PLC \n \n \n\n\n\n\nDetails\n\n\n\nDate: September 15-17\, 2026Times: 8:30 am – 4 pmLocation: MA Training Center-3405 Board Road\, York PA 17406 \n\n\n\nCost (member) : $850 (+book)Cost (non-member) $1275 (+book) \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/motor-drives/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260915T180000 DTEND;TZID=America/New_York:20260915T210000 DTSTAMP:20260616T215258Z CREATED:20260610T175915Z LAST-MODIFIED:20260616T215258Z UID:10000319-1789495200-1789506000@macentralpa.org SUMMARY:Shop Practices DESCRIPTION:Course Description\n This course offers an audit of the operation and function of the following machines: cutoff saw\, band saw\, pedestal grinder\, belt sander\, drill press\, lathe\, vertical milling machine surface grinder\, heat treatment and honing machine. \nOne half of the course will be in the training center shop performing layout work\, demonstrations\, and hands on fabrication of a small tool of their choosing. \n \n\n \n\n Objectives & Outline\n Students will have a general understanding of covered machines including presentation and knowledge skills necessary to maneuver/operate on the shop floor. \nCourse Outline: \n\nSafety\nShop Math-Review\nPrint Reading Review\nMeasuring Skills Review\nTool Layout\nDrill Press\nCut-Off Saw\nBand Saw\nOperation of the Harding Lathe\nOperations of a Vertical Milling Machine\nOperations of a Surface Grinder\n \n \n\n\n\n\nDetails\n\n\n\nThis apprentice class is full. Please contact us for other available sessions \n\n\n\nDate: September 15 -December 2\, 2026 (no class 11/26} \n\n\n\nDays : T&TH \n\n\n\nTimes: 6 – 9 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nMember Cost:   $975 +book \n\n\n\nNON Member: $1450 +book \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/shop-practices/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260918T083000 DTEND;TZID=America/New_York:20260918T160000 DTSTAMP:20260616T215116Z CREATED:20260604T205711Z LAST-MODIFIED:20260616T215116Z UID:10000306-1789720200-1789747200@macentralpa.org SUMMARY:Electrical Print Reading and Cabinet Wiring DESCRIPTION:Course Description\n This course provides a comprehensive\, hands-on introduction to reading electrical prints and wiring control cabinets. Students will gain practical experience by assembling a complete\, functional control cabinet featuring an Allen Bradley PLC and PanelView HMI with ethernet communication. The curriculum covers all aspects of panel-building\, including wire termination\, wire sizing\, wire color coding\, standard industrial connector forms and nomenclature\, raceway utilization\, and more. Emphasis is placed on safety\, precision\, and adherence to industry standards. \n \n\n \n\n Objectives & Outline\n The primary objective of this course is to equip students with the knowledge and skills necessary to interpret electrical prints and proficiently wire control cabinets. Students will learn to assemble a control system from start to finish\, understand and apply various wiring techniques\, and ensure all work meets professional standards. The course aims to enhance students’ technical skills in wire preparation\, electrical bonding\, and the use of hand tools\, while also providing a strong foundation in electrical theory and print reading. \n\nOverview of control cabinets and their components\nTechniques for proper wire termination and sizing\nGuidelines for wire color coding and labeling\nCommon industrial connector types and nomenclature\nEffective raceway utilization in control cabinets\nIntroduction to essential hand tools and wire preparation techniques\nPrinciples of electrical bonding and application of Ohm’s Law\nReading and interpreting electrical symbols and annotations\nStep-by-step assembly and wiring of a control cabinet with Allen Bradley PLC and PanelView HMI\nEnsuring safety\, compliance\, and adherence to industry standards in panel building\n\n \n \n\n\n\n\nDetails\n\n\n\nDate: September 18 -22 \, 2026 \n\n\n\n (no weekends\, class is Friday 18\, Monday 21\, Tuesday 22)Times: 8:30 am -4 pmLocation: MA Training Center 3405 Board Road\, York PA 17406Member Cost :   $875NON Member: $1600 \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/electrical-print-reading-and-cabinet-wiring/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260923T083000 DTEND;TZID=America/New_York:20260923T160000 DTSTAMP:20260616T220413Z CREATED:20260604T210013Z LAST-MODIFIED:20260616T220413Z UID:10000307-1790152200-1790179200@macentralpa.org SUMMARY:Electrical Troubleshooting DESCRIPTION:Course Description\n This course provides a comprehensive exploration of all aspects of troubleshooting electrical and electronic systems. It is designed for use in the electrical industry\, and related fields. The course includes new and expanded coverage of NFPA 70E® requirements\, and motor nameplate interpretation. \n \n\n \n\n Objectives & Outline\n The primary objective of this course is to equip students with practical knowledge and skills for troubleshooting various electrical and electronic systems. Students will learn step-by-step troubleshooting procedures and engage in hands-on activities that reinforce the concepts presented. The course also aims to familiarize students with the latest industry standards and requirements.\nCourse Outline: \n• Troubleshooting and Basic Electrical Theory\n• Understanding Symbols\, Circuits\, and Meter Terminology\n• Working with Meters and Special Meters\n• Troubleshooting Relays\, Starters\, and Motors\n• Understanding Power Distribution and Power Quality\n• Working with Electric Motor Drives\, Lighting Circuits\, and Power Distribution Systems \nStudents must have electrical knowledge or have taken the Industrial Motor Controls. \n \n \n\n\n\n\nDetails\n\n\n\nDate:  September 23-25\, 2026 \n\n\n\nTimes: 8:30 am – 4 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member): $875Cost (non-member): $1600 \n\n\n\n  \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/electrical-troubleshooting/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260926T073000 DTEND;TZID=America/New_York:20260926T173000 DTSTAMP:20260618T190844Z CREATED:20260122T171317Z LAST-MODIFIED:20260618T190844Z UID:10000004-1790407800-1790443800@macentralpa.org SUMMARY:Golf Tournament 2026 DESCRIPTION:23rd Annual Manufacturers’ Association Golf Tournament\n\n\n\nA Manufacturing Community Fundraiser for Our Foundation \n\n\n\n\n \n \n \n\n\nGolf Outing Details\n\n\n\n\n\n\n\nA day full of golf\, players’ gifts\, business networking\, contests\, prizes\, and raffles. Drive your business forward with networking on the course. Our Annual Manufacturers’ Association Golf Outing is our premier networking event\, blending business connections with a day of fun and golf. \n\n\n\nDon’t wait too long\, this event sells out every year! \n\n\n\n \n\n\n\nWays to participate: \n\n\n\n\nRegister a foursome and join all the fun\n\n\n\nSponsor our event\, some have a foursome included!\n\n\n\nDon’t Golf? Join us for networking while enjoying great food: $40.00 per person!\n\n\n\nBe a RAFFLE SPONSOR: Donate a custom basket/gift for the event raffle. Includes signage on the raffle table & a linked logo on the website promoting your donation.\n\n\n\n\n\nFlyer\n\n\n\n\n\nTournament Schedule\n\n\n\nTime Activity7:30 – 8:30 AM | Registration\, Breakfast & Putting Challenge8:30 AM | Shotgun Start – Best Ball Scramble2:00 PM | Dinner\, Drinks\, Raffles & Prizes \n\n\n\nPricing\n\n\n \n \n \n \n\nFoursome\n\n\n\n$950\n\n\n \n\n \n \n\nFoursome & Hole Sponsorship\n\n\n\n$1\,150\n\n\n \n\n \n\n\nPlayer Package Add-Ons\n\n\n\n$25 per player (in advance) | $30 per player (day of the Outing)2 Mulligans and 1 Entry for the Putting Challenge (before tournament only) \n\n\n\n\nRegister Today\n\n\n\n \n \n\n\n\n\n \n \n \n\nImportant Registration Notice\n\n\n\nEarly registration (now through June 30\, 2026) is reserved for manufacturing organizations only. Non-manufacturing organizations are encouraged to register beginning July 1\, 2026. Please note that any early registrations from non-manufacturing organizations will be cancelled and will need to be resubmitted after the open registration date. \n\n\n \n \n\n\n\n\n \n \n \n\nAvailable Sponsorship Opportunities\n\n\n\n \n \n Tournament\n \n Available\n \n \n \n \n\n\n\n$6\,000.00 \n\n\n\n\n\nIncludes a foursome team\, logo on players’ gift\, business at the tee\, table at registration\, or dinner & recognition signage. \n\n\n\n\n \n \n\n\n\n\n \n \n Event \n \n 2 Available\n \n \n \n \n\n\n\n$4\,000.00 \n\n\n\n\n\nIncludes a foursome team\, logo on players’ gifts\, event & hole sign\, recognition & signage at dinner. \n\n\n\n\n \n \n\n\n\n\n \n \n Golf Ball Logo\n \n Available\n \n \n \n \n\n\n\n$4\,000.00 \n\n\n\n\n\nIncludes a foursome team\,  hole sign\, and logo on golf balls. \n\n\n\n\n \n \n\n\n\n\n \n \n Water Bottle\n \n Available\n \n \n \n \n\n\n\n$3\,000.00 \n\n\n\n\n\nIncludes a foursome team\, company logo/ad on water bottles. \n\n\n\n\n \n \n\n\n\n\n \n \n Dinner\n \n Available\n \n \n \n \n\n\n\n$3\,000.00 \n\n\n\n\n\nIncludes a foursome team\, hole sign\, signage & recognition at dinner. \n\n\n\n\n \n \n\n\n\n\n \n \n Breakfast\n \n Available\n \n \n \n \n\n\n\n$2\,500.00 \n\n\n\n\n\nIncludes a foursome team\, hole sign\, signage at registration & breakfast table\, recognition during tee off announcements. \n\n\n\n\n \n \n\n\n\n\n \n \n Golf Cart\n \n Available\n \n \n \n \n\n\n\n$2\,500.00 \n\n\n\n\n\nIncludes a foursome team\, hole sign\, and logo signage on golf carts. \n\n\n\n\n \n \n\n\n\n\n \n \n Business at the Tee\n \n 3 Available\n \n \n \n \n\n\n\n$1\,000.00 \n\n\n\n\n\nIncludes a tent\, table\, chairs\, and signage promoting your business at the tee. \n\n\n\n\n \n \n\n\n\n\n \n \n Beverage Station\n \n 2 Available\n \n \n \n \n\n\n\n$1\,000.00 \n\n\n\n\n\nIncludes hole sign\, signage at stations\, logo on beverage coolers. \n\n\n\n\n \n \n\n\n\n\n \n \n Beverage Cart\n \n Available\n \n \n \n \n\n\n\n$1\,000.00 \n\n\n\n\n\nIncludes signage at the event\, on the cart\, and on the course. \n\n\n\n\n \n \n\n\n\n\n \n \n Putting Challenge & Driving Range\n \n Available\n \n \n \n \n\n\n\n$750.00 \n\n\n\n\n\nIncludes signage at practice putting green & driving range. \n\n\n\n\n \n \n\n\n\n\n \n \n Hole in One\n \n Avaialble\n \n \n \n \n\n\n\n$500.00 \n\n\n\n\n\nIncludes signage at hole-in-one tee & hole. \n\n\n\n\n \n \n\n\n\n\n \n \n Event Rule Book\n \n Available\n \n \n \n \n\n\n\n$500.00 \n\n\n\n\n\nIncludes hole sign & company logo on rule book. \n\n\n\n\n \n \n\n\n\n\n \n \n Hole Sponsorship\n \n Available\n \n \n \n \n\n\n\n$250.00 \n\n\n\n\n\nIncludes signage on the green near hole. \n\n\n\n\n \n \n\n\n\n\n \n \n Raffle Sponsor\n \n Available\n \n \n \n \n\n\n\nTBD \n\n\n\n\n\nDonate a custom basket/gift for the event raffle. Includes signage on raffle table & linked logo on website promoting your donation. \n\n\n\n\n \n \n\n\n\n\nSponsorship and Registration Form\n\n\n\nNOTICE: Early registration (now through June 30\, 2026) is reserved for manufacturing organizations only. Non-manufacturing organizations are encouraged to register beginning July 1\, 2026. Please note that any early registrations from non-manufacturing organizations will be cancelled and will need to be resubmitted after the open registration date. \n\n\n\n \n \n\n \n \n \n \n Name*\n \n \n First Name\n \n \n \n \n Last Name\n \n \n \n Company Name*Phone*Company Email*\n \n Company Address* \n \n \n Street Address\n \n \n Address Line 2\n \n \n City\n \n \n State\n AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces Pacific\n \n ZIP Code\n \n \n \n Please list your foursome here: First Name\, Last Name\, and Email Address.*Available Packages/Sponsorships*— Select an option —Foursome (9 items remaining)Foursome & Hole Sponsorship (9 items remaining)Tournament Sponsor (1 item remaining)Event Sponsor (2 items remaining)Golf Ball Logo Sponsor (0 items remaining)Water Bottle Sponsor (1 item remaining)Dinner Sponsor (1 item remaining)Breakfast Sponsor (1 item remaining)Golf Cart Sponsor (1 item remaining)Business at the Tee Sponsor (3 items remaining)Beverage Station Sponsor (1 item remaining)Beverage Cart Sponsor (1 item remaining)Putting Challenge & Driving Range Sponsor (1 item remaining)Hole in One Sponsor (1 item remaining)Rule Book Sponsor Sponsor (1 item remaining)Hole Sponsor Sponsor (18 items remaining)Dinner ONLYPlayer Package Add-Ons Quantity\n \n \n Price:\n $25.00\n \n \n Quantity \n 2 Mulligans and 1 Entry for the Putting ChallengeTotal\n \n You will be sent an invoice within a few days of registration.\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n\n \n\n\n\n \n \n\n\n\n\n \n \n \n\nMeet Our Sponsors\n\n\n\n \n \n\n \n \n\n\n\n\n \n \n \n\nQuestions About Manufacturers’ Association Golf Outing?\n\n\n\nOur team is here to answer any questions you may have about our Manufacturers’ Association Golf Outing\, from sponsorship opportunities to dinner. \n\n\n\n\nContact Our Team URL:https://macentralpa.org/event/golf-tournament-2026/ LOCATION:Hanover Country Club\, 200 Water St\, Abbottstown\, Pennsylvania\, 17301\, United States CATEGORIES:Event END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260929T083000 DTEND;TZID=America/New_York:20260929T160000 DTSTAMP:20260610T214556Z CREATED:20260604T210229Z LAST-MODIFIED:20260610T214556Z UID:10000308-1790670600-1790697600@macentralpa.org SUMMARY:Industrial Sensors DESCRIPTION:Course Description\n This course will provide students with a hands on training to familiarize them with various industrial sensor technologies\, detection methods & applications. \n \n\n \n\n Objectives & Outline\n Course Objectives:\nDifferentiate sensor types and underlying technology. Also\, identify the best sensor for a particular application then program the sensors to reliably and accurately detect the target object.\nCourse Outline:\n• Proximity sensors\n• Photoelectric sensors\n• Thermocouples and RTD’s\n• Vision sensors\n• Fiberoptic sensors\n• Temperature controllers\n• Encoders\n• Counters\, Timers\, and Tachometers \nPrerequisite- Electricity 1 or a working knowledge of electricity or approval from our training team. \n \n \n\n\n\n\nDetails\n\n\n\nDate: September 29 – October 2\, 2026 \n\n\n\nTimes: 8:30 am – 4 pm \n\n\n\nLocation: MA Training Center\, 3405 Board Road\, York PA 17406 \n\n\n\nCost (member) : $900 \n\n\n\nCost ( non member) $ 1600 \n\n\n\n \n\n\n\n \n\n\n\n \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/industrial-sensors/ LOCATION:MA Training Center\, 3405 Board Road\, York\, PA\, 17406\, United States CATEGORIES:Course,Trade & Technical END:VEVENT BEGIN:VEVENT DTSTART;TZID=America/New_York:20260929T090000 DTEND;TZID=America/New_York:20260929T123000 DTSTAMP:20260602T210402Z CREATED:20260602T205403Z LAST-MODIFIED:20260602T210402Z UID:10000301-1790672400-1790685000@macentralpa.org SUMMARY:Supervisory 1 - Hanover DESCRIPTION:Course Description\n Receive the tools to take your supervision abilities to the next level. \nBecome a confident leader who is ready to take charge of your department and learn how to treat your employees with dignity and respect. \nThis all NEW 14 hour certificate program is facilitated by one of Franklin Coveys highly requested trainer’s. Receive the tools to take your supervision abilities to the next level. Become a confident leader ready to take charge of your department and learn how to treat your employees with dignity and respect. \n \n\n \n\n Objectives & Outline\n The course will provide potential or current supervisors with the basic tools and skillsets to “get results through other people”. \nParticipants will have the opportunity for peer interaction plus the ability to discuss real-life scenarios with instructors that have extensive training and supervisory experience. \nIf have been recently promoted\, working on your career goals or a seasoned supervisor\, then this program is for you! \nTopics include: \n\nRoles in Management\nCommunicating clear expectations\nDelegating\nBuilding trusting relationships through the DISC model\nProviding feedback\nTraining/Coaching\nProviding recognition\nResolving conflict while maintaining morale\n\n* This course is also available for onsite company specific.* \nWant to earn the Master Supervision Certificate?  Complete all 3 levels & two elective courses. \n \n \n\n\n\n\nDetails\n\n\n\nDate:  September 29 – October 20\, 2026Sessions:  4 consecutive TuesdaysTimes:  9 am- 12:30pm \n\n\n\nLocation: The Manufacturer’s Association Training Partner location- Utz – 309 Wilson Ave\, Hanover\, PA 17331Cost (member): $725Non Member: $1050 \n\n\n\n \n \n Class Registration Form\n \n Open Form\n \n \n \n \n\n\n\n \n \nSorry\, but registration is currently full for this course. URL:https://macentralpa.org/event/supervisory-1-hanover/ LOCATION:Hanover Training Partner Location- Utz\, 309 Wilson Ave\, Hanover\, Pennsylvania\, 17331\, United States CATEGORIES:Course,Professional Development END:VEVENT END:VCALENDAR